Try it on paper first. A hint, the key idea and the worked solution are here when you need them.
Two flasks each hold of activated charcoal and of acetic acid. Flask A starts at , and flask B at . After shaking for an hour at , each is filtered. A portion of the filtrate from A needs of sodium hydroxide. The same portion from B needs of the same alkali. Assume the volume of the solution does not change. Find the concentration left in A, the amount adsorbed for each gram in A and in B (in millimoles), and the Freundlich exponent for acetic acid on this charcoal.
The Freundlich isotherm is for a gas and for a solute, with . In logarithms,
The amount of solute adsorbed is .
Have you tried it?
Work it out on paper first. It is fine to get stuck or make a mistake: that is how we learn. When you are ready, go through the solution one step at a time, and check each step against your own.
Step 1. Concentrations left. A: . B: .
Step 2. Amounts adsorbed. A: , so . B: , so .
Step 3. The exponent. .
Answer: , , and .
Check. The exponent lies between 0 and 1. It is near 1, as expected for a dilute solution far from a full surface.
Watch out. Using the starting concentrations 0.200 and 0.100 in Step 3 gives , a wrong value.
Log in to join the discussion.
Loading…