Try it on paper first. A hint, the key idea and the worked solution are here when you need them.
Three electrolytic cells are joined in series to a battery, as the figure shows, so the same current flows through each. Cell A holds copper(II) sulfate solution with two copper electrodes. Cell B holds of silver nitrate solution with and two platinum electrodes; it has no acid in it at the start. Cell C holds dilute sulfuric acid with two platinum electrodes. A steady current of flows for . At the cathode of cell B, silver ions are reduced in preference to anything else for as long as any are left. Oxygen forms at the platinum anodes. Take , molar masses and , and . Gas volumes are for the dry gases at and . The volume of solution in cell B stays at .
Have you tried it?
Work it out on paper first. It is fine to get stuck or make a mistake: that is how we learn. When you are ready, go through the solution one step at a time, and check each step against your own.
Plan. Count the electrons, then share them out in each cell. Cell B changes its cathode reaction partway through.
(a) Charge. , which is of electrons.
(b) Silver. Cell B has only of silver ions, fewer than the electrons. All of it deposits: . The silver runs out after .
(c) Hydrogen in cell B. The other of electrons reduce : . That is of hydrogen, and .
(d) Copper anode. It loses . The cathode gains the same mass, so the copper sulfate solution keeps its strength.
(e) Cell C. Water is split: hydrogen and oxygen , together , so .
(f) pH of cell B. The anode reaction makes of . The hydrogen at the cathode used of it. The rest, (one for each silver ion), stays as nitric acid: and .
Watch out. Using all the charge for silver gives , more silver than the solution holds. Counting every from the anode gives a pH of .
Log in to join the discussion.
Loading…