Try it on paper first. A hint, the key idea and the worked solution are here when you need them.
These steps of a titration of an alkali with an acid are in the wrong order.
A. Stop when the indicator changes colour and stays changed.
B. Put of alkali in a conical flask and add two or three drops of indicator.
C. Rinse the burette with the acid, fill it, and read the start.
D. Run the acid in, swirling the flask, and slow down to a drop at a time near the end.
E. Read the burette and find the titre.
In a titration, moles of known solution . Use the equation to find the moles of the other substance. Concentration . Use the mean of the concordant titres, within , and leave out the rough titre.
Have you tried it?
Work it out on paper first. It is fine to get stuck or make a mistake: that is how we learn. When you are ready, go through the solution one step at a time, and check each step against your own.
Plan. Put the steps in the order a student works.
Step 1. The order. First prepare the burette (C). Then measure the alkali and add the indicator (B). Then add the acid (D). Stop at the end-point (A). Then read and find the titre (E).
Step 2. The apparatus. A volumetric pipette, with a pipette filler, measures the .
Step 3. The swirling. It mixes the acid with the alkali, so the reaction is complete and the colour change is the same all through the flask.
Step 4. The rough titration. It shows roughly where the end-point is, so the later titrations can add acid drop by drop near it.
Answer: (a) C, B, D, A, E. (b) A volumetric pipette. (c) To mix the solutions. (d) To find the approximate end-point.
Check. The titre needs a start and an end reading, and the start reading is taken first.
Log in to join the discussion.
Loading…