Try it on paper first. A hint, the key idea and the worked solution are here when you need them.
In a parallel cable, the slowest wire falls behind the fastest one by for every metre of cable. Each bit lasts . An engineer says the bits stay in step only while the gap is less than half the time of one bit.
Serial sends one bit at a time on one wire: cheap, no skew, reliable over long distances. Parallel sends several bits at once on several wires: faster over short distances, but skew makes it unreliable over long ones. Simplex is one direction only, half-duplex is both directions one at a time, full-duplex is both directions at once. The ideal time is .
Have you tried it?
Work it out on paper first. It is fine to get stuck or make a mistake: that is how we learn. When you are ready, go through the solution one step at a time, and check each step against your own.
Step 1. The allowed gap. Half of is .
Step 2. The longest cable. Each metre adds . So the longest cable is .
Step 3. Double the rate. Each bit now lasts , so the allowed gap is . The longest cable is .
Step 4. The lesson. The faster the bits, the shorter a parallel cable must be. This is why fast links over any real distance are serial. The exam does not ask for this calculation, but it does ask you to explain skew.
Answer: (a) . (b) . (c) It halves to ; fast parallel links only work over very short distances.
Log in to join the discussion.
Loading…