Try it on paper first. A hint, the key idea and the worked solution are here when you need them.
Here are four steps of a computer starting up, in a jumbled order.
Put them in the right order. Give the position of each step.
The bootloader is firmware: software held in a chip on the main circuit board, kept when the power is off. It runs on the hardware, checks it, and loads the operating system from the drive into RAM. The operating system runs on the firmware, and applications run on the operating system. An application asks the operating system to use the hardware for it.
Have you tried it?
Work it out on paper first. It is fine to get stuck or make a mistake: that is how we learn. When you are ready, go through the solution one step at a time, and check each step against your own.
Step 1. The bootloader runs first, on the hardware: Q is in position 1.
Step 2. The bootloader loads the operating system into RAM: S is in position 2.
Step 3. The operating system starts and shows the desktop: P is in position 3.
Step 4. An application runs on the operating system: R is in position 4.
Answer: Q, S, P, R.
Log in to join the discussion.
Loading…