Try it on paper first. A hint, the key idea and the worked solution are here when you need them.
An office is at when the air conditioning leaves it. It cools by each minute. The heater comes on when the reading falls to . The microprocessor reads the sensor every seconds.
After how many minutes does the heater come on, and how many readings are taken before then?
A control loop reads the sensor, compares the reading with the stored values, acts, and repeats for as long as the system runs. Feedback means that what the actuator does changes the next sensor reading. With two stored values, the actuator comes on below the low value and goes off above the high value; between them nothing changes.
Have you tried it?
Work it out on paper first. It is fine to get stuck or make a mistake: that is how we learn. When you are ready, go through the solution one step at a time, and check each step against your own.
Step 1. The drop. degrees.
Step 2. The time. minutes.
Step 3. The readings. Two readings each minute, so readings.
Check. After minutes the office has cooled by degrees, to .
What if? If the office cooled twice as fast, the heater would come on after half the time, minutes.
Answer: after minutes, with readings taken.
Log in to join the discussion.
Loading…