Try it on paper first. A hint, the key idea and the worked solution are here when you need them.
A network card has the address 00-1F-A7-3C-90-D2. Each pair of hex digits is one byte.
Hexadecimal is base 16, with the digits 0 to 9 and A to F (10 to 15). One hex digit is one nibble of four bits, so a byte is two hex digits. Binary to hex: split into nibbles from the right and write each one as a digit. Hex to denary: the place values are 4096, 256, 16 and 1.
Have you tried it?
Work it out on paper first. It is fine to get stuck or make a mistake: that is how we learn. When you are ready, go through the solution one step at a time, and check each step against your own.
Given. The bytes A7 and 3C of the address.
Plan. Change each hex digit to a nibble, then use place values.
Step 1. A7 in binary. A is 10, which is 1010, and 7 is 0111. So A7 is 10100111.
Step 2. A7 in denary. . Check with the bits: .
Step 3. A73C. 3 is 0011 and C (12) is 1100. So the 16 bits are 1010011100111100.
Step 4. Count the 1s. 1010 has 2, 0111 has 3, 0011 has 2 and 1100 has 2. That is 9 in all.
Step 5. Why hexadecimal. The full address is 48 bits long in binary but only 12 hex digits. It is shorter, so it is easier for a person to read and to copy without a mistake. Each digit still changes straight back to four bits.
Answer: (a) 10100111, which is 167. (b) 1010011100111100, with 9 ones. (c) Hex is shorter and easier for people to read and check.
Log in to join the discussion.
Loading…