Try it on paper first. A hint, the key idea and the worked solution are here when you need them.
A model of a computer's start-up has three parts. The bootloader checks the hardware for s. It then loads an operating system of MiB. Then three start-up applications load, s each.
The bootloader is firmware: software held in a chip on the main circuit board, kept when the power is off. It runs on the hardware, checks it, and loads the operating system from the drive into RAM. The operating system runs on the firmware, and applications run on the operating system. An application asks the operating system to use the hardware for it.
Have you tried it?
Work it out on paper first. It is fine to get stuck or make a mistake: that is how we learn. When you are ready, go through the solution one step at a time, and check each step against your own.
Step 1. Loading with the first drive. s. Total s.
Step 2. Loading with the new drive. s. Total s.
Step 3. The part that does not change. The bootloader's s of checks. The bootloader is firmware, held in a chip on the main circuit board, so the speed of the drive does not matter to it.
Answer: (a) s. (b) s. (c) The bootloader checks.
Watch out. In this model the applications load in a fixed time. On a real computer they come from the drive too, so they would also be faster.
Log in to join the discussion.
Loading…