Try it on paper first. A hint, the key idea and the worked solution are here when you need them.
A materials teacher gives you ten samples: low density polythene, high density polythene, PVC, Bakelite, melamine-formaldehyde resin, nylon 6,6, polyethylene terephthalate (a polyester), Buna-S, neoprene and lightly vulcanised natural rubber. She asks you to sort them in three ways. First, by the forces between the chains into elastomers, thermoplastics, fibres and thermosetting polymers. Second, by structure into linear, branched and cross-linked. Third, by how they form into addition and condensation polymers. Treat the polythenes and PVC as thermoplastics, the two resins as thermosets, and lightly vulcanised rubber as an elastomer with cross-links. Count the elastomers, the thermoplastics, the cross-linked polymers and the condensation polymers.
Check an answer or open a hint to unlock the worked solution.
Have you tried it?
Work it out on paper first. It is fine to get stuck or make a mistake: that is how we learn. When you are ready, go through the solution one step at a time, and check each step against your own.
Plan. Put each polymer in a table with three columns, then count.
Step 1. Forces. Elastomers: Buna-S, neoprene and vulcanised rubber, so 3. Thermoplastics: the two polythenes and PVC, so 3. Fibres: nylon 6,6 and the polyester, so 2. Thermosets: Bakelite and melamine resin, so 2.
Step 2. Structure. Cross-linked: Bakelite, melamine resin and vulcanised rubber, so 3. Branched: low density polythene. The rest are linear.
Step 3. Formation. Condensation: Bakelite, melamine resin, nylon 6,6 and the polyester, so 4. The other six are addition polymers.
Answer: 3 elastomers, 3 thermoplastics, 3 cross-linked polymers and 4 condensation polymers.
Check. By forces, , every sample once.
Watch out. Vulcanised rubber is cross-linked, yet it is still an elastomer. Only a few cross-links join its chains, so they can still uncoil.
Log in to join the discussion.
Loading…
A polymer chain of repeat units has . Classes: by source, structure (linear, branched, cross-linked), formation (addition, condensation), forces (elastomer, thermoplastic, fibre, thermoset) and growth (chain, step). A copolymer has two or more monomers in one chain.