Try it on paper first. A hint, the key idea and the worked solution are here when you need them.
A family's home network has a laptop, two phones, a games console and a printer. All of them use the internet through one router. The family also runs a small web server at home, for a hobby website.
Describe the jobs of the router in this network. Explain the difference between a static and a dynamic IP address, and which one the web server should have. Then explain why IPv6 was introduced.
A computer needs a NIC to access a network. A MAC address is given to the NIC at manufacture. It is 48 bits, written as 12 hexadecimal digits: a manufacturer code and a serial code. An IP address is allocated by the network and can be static or dynamic. IPv4 is 32 bits, written as four denary numbers from 0 to 255. IPv6 is 128 bits, written as groups of hexadecimal digits. A router sends data to a destination, can assign IP addresses and can connect a local network to the internet.
Have you tried it?
Work it out on paper first. It is fine to get stuck or make a mistake: that is how we learn. When you are ready, go through the solution one step at a time, and check each step against your own.
Step 1. The router.
Step 2. Static and dynamic. A static IP address stays the same every time the device connects. A dynamic IP address is given out each time the device connects, so it can change.
Step 3. The web server. It should have a static IP address. Visitors must find it at the same address every time.
Step 4. Why IPv6. IPv4 addresses are 32 bits, which gives about 4.3 billion addresses. That is not enough for every device in the world. IPv6 addresses are 128 bits, which gives far more addresses.
Answer: the router sends data to the right device, assigns IP addresses and connects the network to the internet. A static address does not change, but a dynamic one can, and the server needs a static one. IPv6 was introduced because IPv4 does not have enough addresses.
Log in to join the discussion.
Loading…