Try it on paper first. A hint, the key idea and the worked solution are here when you need them.
A digital signal sends 0 V for a 0 and V for a 1. The sent bits are 1 0 0 1 1 0 1 1 0 1. The receiver gets the voltages , , , , , , , , and V, because of noise. It reads a voltage above V as a 1. Find four things. (a) The number of bits that it reads as 1. (b) The number of bits that it reads wrongly. (c) The biggest difference between a received voltage and the voltage that was sent, in V. (d) How much more noise that worst pulse could stand before it is read wrongly, in V.
Extended idea: a digital receiver only decides whether each voltage stands for 1 or for 0. Noise matters only if it is big enough to push a voltage across the threshold.
Have you tried it?
Work it out on paper first. It is fine to get stuck or make a mistake: that is how we learn. When you are ready, go through the solution one step at a time, and check each step against your own.
Given. Threshold V. Sent levels 0 V and V.
Step 1. The decisions. The voltages above V are , , , , and . That is 6 bits read as 1.
Step 2. The errors. The decisions are 1 0 0 1 1 0 1 1 0 1, the same as the bits that were sent. The number read wrongly is 0.
Step 3. The biggest noise. The voltage of V was sent as V, so the noise is V. No other pulse is further from its level.
Step 4. The margin. The pulse is at V, and the receiver reads it correctly while it stays above V. So it could stand V more noise.
Answer: 6; 0; V; V.
Check. The receiver sends on a clean signal of 0 V and V, so the noise is gone. An analogue signal could not be cleaned in this way.
Log in to join the discussion.
Loading…