Try it on paper first. A hint, the key idea and the worked solution are here when you need them.
A cement works plans a clinker with this composition by mass: calcium oxide 60.0 %, silica 22.0 %, alumina 6.5 %, iron(III) oxide 2.0 %, magnesium oxide 2.5 % and sulphur trioxide 1.5 %. A good cement needs a ratio of silica to alumina between 2.5 and 4, and a ratio of lime to the total of silica, alumina and iron(III) oxide close to 2. Find the two ratios. Then find the mass of pure calcium carbonate needed to supply the lime in one tonne of clinker, and the mass of carbon dioxide this gives off. Use for calcium carbonate and for calcium oxide.
Check an answer or open a hint to unlock the worked solution.
Have you tried it?
Work it out on paper first. It is fine to get stuck or make a mistake: that is how we learn. When you are ready, go through the solution one step at a time, and check each step against your own.
Step 1. , inside the range 2.5 to 4.
Step 2. , close to 2.
Step 3. of calcium oxide is . The same amount of calcium carbonate is .
Step 4. Carbon dioxide: .
Answer: , , and .
What if? This carbon dioxide comes from the limestone itself, not from the fuel. That is why cement making releases carbon dioxide even with clean fuel.
Log in to join the discussion.
Loading…
, . Gypsum () gives plaster of Paris () and then anhydrite (). Lime water: , then .