Poles, polars and chords with a given midpoint (free… | StemPy Lab
Free previewCourse: Standard
Poles, polars and chords with a given midpoint
From a point outside a conic you draw two tangents, and the line through their points of contact is T=0. The same line exists for any point P: it is the polar of P, and P is its pole. Polars explain the chord with a given midpoint, T=S1, the diameters of a conic and the conjugate diameters of an ellipse.
This is the first lesson of Conics Beyond the Textbook: Polars, Normals and Families of Curves, free for everyone to read.
What you will be able to do
write the polar of a point for a circle, a parabola, an ellipse and a hyperbola, and find the pole of a line;
use the harmonic property of the pole and the polar;
find the chord of any conic with a given midpoint, and the locus of the midpoints of parallel chords;
work with conjugate diameters of an ellipse.
A lamp inside a round pond
You met the chord of contact in the first course of this chapter. From a point P outside a circle you draw two tangents, and the line through the two points of contact is T=0. Now put P inside the pond. No tangent can be drawn. Does the line T=0 still mean something?
It does. The line T=0 is defined for every point, inside or outside. We call it the polar of P, and we call P the pole of that line. Most textbooks stop at the chord of contact. This lesson goes past it.
The polar for each conic
Write T by the usual rule: replace x2 by xx1, y2 by yy1, x by 21(x+x1) and y by 21(y+y1). The polar of P(x1,y1) is T=0.
Three cases follow at once. If P is on the conic, the polar is the tangent at P. If P is outside, the polar is the chord of contact. If P is inside, the polar misses the conic.
Where the polar of a circle lies
Take the circle x2+y2=25 and the inside point P(3,1). Its polar is 3x+y=25.
The direction. The normal of the line 3x+y=25 is the vector (3,1), which points along CP. So the polar is perpendicular to CP.
The distance. The polar is 1025≈7.91 from the centre, and CP=10≈3.16.
The product.CP×1025=25=r2.
So the polar of P is the line perpendicular to CP at the distance CPr2 from the centre. A point near the centre has its polar far away. The centre itself has no polar at all.
The harmonic property
Draw any line through P. Let it cut the conic at A and B and the polar of P at Q. Measure the lengths from P along the line, with a sign for the direction. Then
PA1+PB1=PQ2.
We say that P and Q divide ABharmonically. Check it on the circle x2+y2=25 with P(3,1) and the line y=1. The line meets the circle at x=±24≈±4.90 and the polar 3x+y=25 at Q(8,1). So PA=24−3, PB=−(24+3) and PQ=5. Then
24−31−24+31=24−96=52=PQ2.
This property is the reason for the name. It also gives a second definition: the polar of P is the locus of the harmonic partner Q of P on every chord through P.
The pole of a line
To find the pole of a given line, compare it with the polar. Take the ellipse 16x2+9y2=1 and the line 3x+4y=12. Write the line as 4x+3y=1. The polar of (x1,y1) is 16xx1+9yy1=1. Compare the coefficients: 16x1=41 and 9y1=31. So the pole is (4,3).
The point (4,3) is outside the ellipse. Its two tangents are x=4 and y=3, which touch at (4,0) and (0,3). Both points lie on 3x+4y=12, as a chord of contact must.
Now take the inside point (2,1.5), halfway from the centre to (4,3). Its polar is 162x+91.5y=1, which is 3x+4y=24. It is parallel to the first polar, because both poles lie on one line through the centre. It stays outside the ellipse.
The ellipse x squared over 16 plus y squared over 9 equals 1 in blue. The outside point Q (4, 3) is marked in red. The two tangents from Q are the green lines x equals 4 and y equals 3, which touch the ellipse at (4, 0) and (0, 3). The solid red line 3x plus 4y equals 12 through these two points is the polar of Q, its chord of contact. The inside point P (2, 1.5) lies halfway along the dotted line from the centre to Q. Its polar, the dashed red line 3x plus 4y equals 24, is parallel to the first and stays outside the ellipse.
Conjugate points. Look at the equation a2xx1+b2yy1=1. It does not change when you swap (x,y) and (x1,y1). So if Q lies on the polar of P, then P lies on the polar of Q. Such points are called conjugate points. The same swap gives a rule for lines: if the pole of one line lies on a second line, the pole of the second lies on the first.
The focus and the directrix. For 25x2+9y2=1 the focus is (4,0). Its polar is 254x=1, which is x=425, the directrix. For y2=4ax the polar of the focus (a,0) is 0=2a(x+a), which is x=−a, the directrix again. So the directrix is the polar of the focus. Then every point of the directrix is conjugate to the focus. The chord of contact from any point of the directrix passes through the focus.
The chord with a given midpoint, for every conic
In the first course you found the chord of a circle bisected at a point with T=S1. The rule holds for every conic. Here S1 is the value of the left side of S=0 at the midpoint.
An ellipse. The chord of 16x2+9y2=1 bisected at (1,1):
16x+9y=161+91=14425,
which is 9x+16y=25.
A parabola. The chord of y2=8x bisected at (4,2). Here T=2y−4(x+4) and S1=4−32=−28. So 2y−4x−16=−28, which is y=2x−6.
Check the parabola. Put y=2x−6 in y2=8x: 4x2−32x+36=0. The two roots add up to 8, so the midpoint has x=4 and y=2×4−6=2. The rule works.
Why does T=S1 work? Take the ellipse and a line through M(x1,y1) in the direction (l,n). Its points are (x1+sl,y1+sn). Put them in the equation of the ellipse:
s2(a2l2+b2n2)+2s(a2x1l+b2y1n)+S1=0.
M is the midpoint when the two roots s add up to zero, so the middle bracket is zero. Then the chord is parallel to the line a2xx1+b2yy1=0. The parallel line through M is exactly T=S1.
Diameters
Draw many parallel chords of slope m in the ellipse a2x2+b2y2=1. Where are their midpoints? Let (h,k) be a midpoint. The chord T=S1 has slope −a2kb2h, and this must be m. So
k=−a2mb2h.
The midpoints lie on a line through the centre. Such a line is a diameter. For 16x2+9y2=1 and chords of slope 21, the diameter is y=−89x.
The same idea gives y=a2mb2x for the hyperbola. For the parabola y2=4ax it gives y=m2a, a line parallel to the axis.
The ellipse x squared over 16 plus y squared over 9 equals 1 in blue with five parallel orange chords of slope one half. The midpoint of each chord is a red dot. All five red dots lie on the solid green line y equals minus 9x over 8 through the centre, labelled diameter. A dashed green line y equals x over 2 through the centre, parallel to the chords, is labelled conjugate diameter.
Conjugate diameters
Let the diameter y=m′x bisect the chords of slope m. The rule above says mm′=−a2b2. This rule is symmetric. So the diameter of slope m also bisects the chords of slope m′. Two such diameters are called conjugate diameters.
Use the eccentric angle from the last course. If one end of a diameter is P(acosθ,bsinθ), an end of its conjugate is D(−asinθ,bcosθ). Their eccentric angles differ by 90∘. Then
CP2+CD2=a2(cos2θ+sin2θ)+b2(sin2θ+cos2θ)=a2+b2.
For 25x2+9y2=1 and θ=60∘: P=(2.5,2.60) and D=(−4.33,1.5). Then CP2=13 and CD2=21, and the sum is 34=25+9.
Another fact of the same kind: the tangents at the four ends of two conjugate diameters make a parallelogram of area 4ab. It does not depend on θ.
Practise with new numbers
Try it in Python
The program finds the polar of a point for an ellipse. Then it draws a line through the point and checks the harmonic property with signed lengths.
Common mistakes
Using T=0 for a midpoint chord. The chord bisected at (x1,y1) is T=S1. The line T=0 is the polar, which is a different line unless the point is on the conic.
Forgetting the halves in T. In T the term 2gx becomes g(x+x1), and 4ax becomes 2a(x+x1).
Comparing a line with the polar when the right sides differ. Make the right side 1 before you compare coefficients.
Taking a diameter as perpendicular to its chords. In a circle it is. In an ellipse the slopes multiply to −a2b2, not to −1.
Remember these
The polar of (x1,y1) is T=0. On the conic it is the tangent, outside it is the chord of contact.
For a circle the polar is perpendicular to CP at the distance CPr2.
The chord with midpoint (x1,y1) is T=S1.
Conjugate diameters of an ellipse: mm′=−a2b2 and CP2+CD2=a2+b2.
The polar of a focus is the directrix.
Check yourself
Try each one on your own first. If you are stuck, open a hint. Then check with Show the answer.
Write the polar of the point (1,−2) for the circle x2+y2=9.
Find the pole of the line 2x+y=4 for the parabola y2=4x.
Find the chord of the hyperbola 4x2−9y2=1 that is bisected at (4,3).
Why does the polar of a point inside a circle never cut the circle?
In the ellipse 9x2+4y2=1 a semi-diameter has length 6. How long is its conjugate semi-diameter?
References
S. L. Loney, The Elements of Coordinate Geometry, Part I, the chapters on the circle and the ellipse (poles, polars and conjugate diameters).
NCERT, Mathematics for Class XI, Chapter 10 (Conic Sections), for the standard equations used here.
Liked this lesson? There is more
Conics Beyond the Textbook: Polars, Normals and Families of Curves is a Standard course. It adds 2 more lessons, practice and tests on top of the free chapter.
12Problems2Python Labs1Question Set1Mock Test
Normals, eccentric angles and the rectangular hyperbola: Through a point you can draw up to three normals to a parabola. Their feet have parameters with t1+t2+t3=0
, and three real normals exist only when
27ak2<4(h−2a)3
. The eccentric angles of an ellipse give the area of an inscribed triangle,
21ab∣∑sin(α−β)∣
. The rectangular hyperbola
xy=c2
has its own rules for the normal and the orthocentre.
Loci, envelopes and families of conics: A locus question asks where a moving point can be. For two tangents from one point, Vieta's rules on the slopes give the locus at once. A family of lines that depends on one number touches a fixed curve, its envelope, found from a double root. Conics through four given points form a family S1+λS2=0, and five points fix one conic.